Custom Cornhole Wraps with Your Own Design (Pair or Single)

Custom cornhole wraps with your own design. Wedding names and a date, a team logo, a flag, your family name: upload it, place it on the board and we print it on a laminated vinyl wrap that sticks right onto a regulation cornhole board. Order a pair for both boards or a single wrap to fix one board. Boards are not included.

What you get

• Each wrap is 25 × 49 inches: the 24 × 48 inch board face plus 0.5 inch on every side, so the vinyl folds over the edge of the board for a clean finish.
• Printed on 4 year outdoor vinyl with a laminate over the print, made in our own shop.
• A pair is two wraps. Use the same design on both boards, or give each board its own design (Board 1 and Board 2).
• Rolled in a tube so it arrives flat and smooth.

The hole

The wrap prints solid over the hole, so your design runs clean across the board. A regulation hole is 6 inches across, centered across the board and 9 inches down from the top edge of the board face. Tick “Hole Guide” and the designer shows the hole and a ring around it so you keep important art and words out of that spot, and we also print a thin line where the hole goes, so you can cut along it after the wrap is on the board. Leave it off and the designer shows no guide and the wrap prints with no line on it.

Prices

These are the exact prices, not estimates. Pick one in the designer above and the same price shows before anything goes in your cart.

How to put it on

1. Clean the board face and edges and let them dry. A smooth, clean surface holds best.
2. Peel back a little of the backing and line up one end with the board. Keep the extra 0.5 inch even on every side.
3. Press the wrap down from the middle out with a squeegee or a soft cloth, peeling the backing as you go.
4. Fold the extra vinyl over the edge of the board.
5. Cut out the hole with a sharp craft knife. Follow the printed line if you ticked the guide, or the spot shown in the designer if you did not.

Made to order

Each wrap is printed to order in our shop, with 2 to 3 working days of production before it ships. It ships rolled in a tube to addresses in the lower 48 states, and local customers are welcome to collect.

Artwork tips

For the sharpest print, upload a picture with roughly 100 DPI at the size you order. Keep words inside the green line in the designer, because the edges fold over the board. Need a sign, a banner or a sticker with the same design? Our design center prints those too.